Contactless deflection sensor for soft robots

Date Submitted Mar 19, 2011          Publication Year 2021         
Michal Karol Dobrzynski, Ramon Pericet-Camara, Dario Floreano

In the emerging field of soft robotics, there is an interest in developing new kinds of sensors whose characteristics do not affect the intrinsic compliance of soft robot components. Additionally, non-invasive shape and deflection sensors may provoke improved solutions to assist in the control of mechanical parts in these robots. Herein, we introduce a novel method for deflection sensing whereby an LED element and a photodiode are placed onto wo substrates connected physically or virtually at a deflection point. The deflection angle between the two planes can be extracted from the LED light intensity detected at the photodiode due to the bell-shaped angular intensity profile of the emitted light. The main advantage of this system is that the components are not in physical contact with the deflection region as in the case of strain gauges and similar sensing methods. The sensor is characterized in a range of deflections of 105-180 degrees, showing a near 1 degree resolution. The experimental data are compared to simulations, modeled by ray tracing. The light intensity vs. deflection angle measurements in our setup displays a maximum difference of 9% and an average difference of approximately 5% with respect to the model. Finally, the proposed concept is applied in the fabrication of a shape monitoring system for a flexible PCB. The system is composed of 12 deflection sensors that operate at frame rate of 33Hz. This device could be applied to monitor the body shape of a soft robot.

Contactless deflection sensor for soft robots,

Contactless deflection sensor for soft robots,
M. K. Dobrzynski, R. Pericet-Camara, D. Floreano, 
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp.1913-1918, 25-30 Sept. 2011,
DOI: 10.1109/IROS.2011.6048425